E-mail: Info@reinkdepot.com       Tel: (416)332-8613

  10 Cover Open
  This means that the printer is open or no EP cartridge.
  20 Paper Jam
  There was a paper jam in the input area
  21 Paper Jam
  There was a paper jam in the area under the toner cartridge.
  21 Paper Out
  Paper out or feed failed
  22 Paper Jam
  There was a paper jam in the fuser or exit sensor section of the printer.
  23 Short Paper
  Replace paper with proper size.
  23 Paper Jam
  This is a duplex jam,check for paper jammed in duplexer.
  24 Feed Failure
  The user attempted to feed through the manual feed port while the printer was feeding from an installed paper or envelope source.
  24 Short Paper
  Replace paper with that of proper lenght.
  26 Wrong Paper Size
  There is a paper jam caused by using the wrong paper size.
  27 Change Paper
  Automatic paper sensing has determined that the paper installed isn't the size requested.
  28 Load Paper
  Either there is no paper or there is a feed failure at the pickup.
  29 Output Bin Full
  Remove the paper from the output bin, if that doesn't work power off the printer.
  30 Top Cover Open
  Either you have a cover that is not quite shut or a cartridge is not properly seated or missing.
  31 Change Paper
  The wrong size paper is being installed.
  32 Wrong Print Cartridge Installed
  The installed print cartridge is not supported by the printer.
  36 Load Paper
  The sensor has indicated that either the tray is empty or there's a feed failure.
  37 Insufficient Collation Memory
  There is not enough memory in the printer to print the job.
  38 Memory Full
  More memory may be required.
  39 Complex Page
  The page is too complex to print.
  40 Default Storage Error
  There has been a printer function error.
  41 Requested Font Missing
  The user has requested a font that is not in memory.
  43 Font Card Not Supported
  The installed font card is not supported by the printer.
  51 Defective Flash
  An error has occurred in a flash simm.