|
|
|
02 WARMING UP (>3 MIN) |
|
2686 Only: |
|
1. DC Power Supply/Main motor driver malfunction. |
|
IIISi/4Si Only: |
|
1. Defective display cable, display, or
Formatter PCA. |
|
11 PAPER OUT |
|
12 PRINTER OPEN |
|
12 OPEN or NO TONER or NO EP |
|
13 PAPER JAM |
|
13.X PAPER JAM |
|
14 NO TONER CARTRIDGE |
|
16 TONER LOW |
|
20 ERROR/MEM OVERFLOW |
|
21 ERROR/PRINT OVERRUN |
|
22 ERROR/ I/O CONFIG ERROR |
|
23 I/O NOT READY |
|
30 PS ERROR XX |
|
40 ERROR (DATA TRANSFER ERROR) |
|
41 ERROR (Temporary Beam Detect Error) |
|
41.1 or 2 Error or 41.3 Error |
|
42 OPT INTERFACE |
|
43 OPT INTERFACE |
|
50 ERROR |
|
51 ERROR (Loss of Beam Detect) |
|
52 ERROR (Incorrect Scanner Speed) |
|
53 ERROR (Accessory Memory Error) |
|
54 DUPLEX FEED |
|
55 ERROR (Internal Communication Problem) |
|
56 ERROR |
|
57 ERROR |
|
57.x ERROR (IIISi/4Si Only) |
|
57.1 ERROR |
|
57.2 ERROR |
|
57.3 ERROR |
|
57.4 ERROR |
|
60-68 SERVICE (II, IID, IIP, IIP+, III,
IID, IIIP) |
|
60, 61, 63 MEMORY ERROR |
|
63 SERVICE |
|
68 RECOVERABLE NVRAM ERROR |
|
69 SERVICE |
|
70-71 ERROR |
|
72 SERVICE |
|
79 SERVICE (Document Error) |
|
80 MIO FAILURE |
|
89 POSTSCRIPT ROM FAILURE |
|
|
|
|